Household items, disposable products, cosmetics, rigid and flexible packaging, toys and industrial product lines.
| Polystyrene Crystal (GPPS) |
- Injection
- High Injection Pressure
- Extrusion
|
| |
| High-Impact Polystyrene (HIPS) |
- Injection
- High-Gloss Injection
- Extrusion
- Extrusion for Deep-Draw Thermoforming
- Extrusion with High Chemical Resistance
|
| |
| Expandable Polystyrene (EPS) |
| |
| High Density Polyethylene (HDPE) |
- Injection
- Blow Molding
- Film
|
| |
| Polyethylene: High-Molecular Weight, High-Density (HMW-HDPE) |
|
|
| |
| Polyethylene: Low-Density (LDPE) |
- Injection
- Blow Molding
- Film
- Heavy Duty
|
| |
| Polyethylene: Lineal Low Density (LLDPE) |
- Injection
- Blow Molding
- Film - DOWLEX: Hexene without additive - Hexene with additive - Octene with additive
|
| |
| Polypropylene: Homopolymer (PP) |
|
|
| |
| Polypropylene: Copolymer (PP) |
|
|
|
| Rigid PVC Compounds (PVC-R) |
- Injection – Blow Molding (Non-toxic): Cosmetic containers with a capacity of up to 250 cm3
- Extrusion: Lamination or Blister - Architectural Profiles - Baseboard Profiles
- Film: Heat-shrink bands for sealing lids - Stretch
- Blow Molding: Containers with a capacity of up to 250 cc. - Containers with a capacity from 250 to 500 cc. - Containers with a capacity from 500 to 1000 cc. - Containers with a capacity from 1000 to 2000 cc. - Containers with a capacity greater than 2000 cc.
|
|
| Flexible PVC Compounds (PVC-F) (Shore A Hardness Scale, from 42 to 95) |
- Injection: Soles for safety shoes - Filters, Bushings - Sandal Straps, Stripes and Soles - Soles and Heels - Electrical Accessories - Motorcycle Handlebar Grips - Dental Trays
- Non-toxic Injection: Lids - Baby Bottle Nipples, Inseminator Devices - Gaskets and Liners - Extendable Film
- Extrusion: Wire Covering - Architectural Profiles - Insulation Profiles - Extendable Film
|
| |
| Nylon 6 (PA6) |
- Injection: Natural, Medium-Viscosity - Natural, High-Viscosity - Black, High-Viscosity - High Viscosity with High Resistance to Heat
|
|
| Calcium Carbonate Compounds (MB CaCO3) |
- Linear Low Density Polyethylene Base for film (LLDPE)
- High Density Polyethylene Base for Blow Molding (PEHD)
- Polystyrene Base (PS)
- Polypropylene Base (PP)
|
